Other Questions

Bonjour, Je suis intéressée par le modèle PALMETTE ou Azatta bentwood stool. Est-il possible de le commander avec une hauteur d’assise de 65 cm ? Merci d’avance.

Bonjour,

Il n'est pas possible de commander ce modèle en hauteur 65cm.

Cependant, vous pouvez commander la version 75cm et vous rapprocher d'un menuisier afin d'effectuer la découpe des pieds pour ajuster la hauteur.

Cordialement,

Alexis.B

Quel est le poids supporté pour cette banquette deux places ?

Bonjour,

Nous ne disposons pas de cette information. Cependant, nos produits sont conçus pour une utilisation professionnelle et intensive. La banquette pourra donc accueillir naturellement les personnes avec un poids plus important.

Cordialement,

Alexis.B

We are interested in purchasing 15 outdoor chairs for our Irish pub terrace in emerald Irish green. The chairs should be waterproof and suitable for outdoor use

Hello,

Please send your request by email to contact@richard-diffusion.com.

One of our sales representatives will be able to provide you with a more detailed response.

Best regards,

Alexis.B

Bonjour, Ce pied est-il adapté pour un plateau de table de 800mm ? merci.

Bonjour,

Pour un plateau de table de 800mm (80cm) nous vous conseillons d'utiliser un piètement 4 branches plutôt qu'un 3 branches.

Le poids sera mieux réparti et cela évitera tout basculement non désiré.

Cordialement,

Alexis.B

Bonjour, pouvez vous me dire comment régler la hauteur des pieds pour mettre a niveau ?

Bonjour,

Pour régler la hauteur des pieds, vous trouverez dans le carton des petites rondelles en plastique de couleur blanche ou noire.

Il vous faudra les insérer au niveau de la vis du pied, avant de visser ceux-ci sur la base de la chaise.

Cordialement,

Alexis.B

Bonjour Est-ce qu'un professionnel de santé peut acheter en ligne chez Richard diffusion des chaises bistrot pour sa salle d'attente ? Meilleures salutations Dr Catherine Aubry Gambini

Bonjour,

Oui vous pouvez tout à fait commander sur notre site internet.

Cordialement,

Alexis.B

Bonjour le pietement bangor , pouvez-vous lavoir en noir ? Merci

Bonjour,

Le piètement BANGOR est un produit qui ne sera, à priori, pas reconduit. Nous ne pourrons donc pas l'avoir en noir.

Cordialement,

Alexis.B

À quoi servent les vérins sur ce pied de table?

Bonjour,

Les vérins servent à stabiliser le piètement et l'empêchent d'être au contact direct du sol.

Cordialement,

Alexis.B

quel pied choisir pour table en bois de 90cm

Bonjour,

Pour une table ronde de 90 cm, nus vous conseillons un piètement 4 branches ou un piètement base ronde (ou carrée, mais moins esthétique)

Vous pouvez en choisir un sur notre site.

Cordialement,

Alexis.B

Les chaises sont-elles rembourrées?

Bonjour,

Le fauteuil Collonges est légèrement rembourré.

Cordialement,

Alexis.B

I woul like to buy 6 or 8 chairs "ANDOINS-EK chair solid beech upholstered" in green, with black strutture, for my house. Is it possible for me as a private?

Hello,

Yes, you can purchase products on our website, even if you're not a professional.

However, depending on your location, you may need to send us an email to place an order. Please send your information and complete request to contact@richard-diffusion.com.

Sincerely,

Alexis.B

Hello, can you tell me what type of table top in 60x60 can suit this foot https://www.richard-diffusion.fr/en/outdoor-table-base/2219-bistrot-4-alu-base-cast-aluminium-4-legs.html#/1009-autres-noir_epoxy Thank you

Hello,

All our 60x60 tops are compatible with this base.

Best regards,

Alexis.B

Hello, I have received the insert kit, can you tell me how much I need to drill to install them, and of course without drilling the table? Thank you

Hello,

In order to drill the trays without going through them, you need to drill with an 8mm wood bit.

You must not exceed 14mm.

Ideally, you should use a drill bit as shown in the following photo:

Hello Can you tell me if it is possible to order a table top in teak 170x90. Thank you. F DUPERRAY-MILLAUD

Hello,

On this reference (table top GENETS) the largest size available is 120x80 cm.

Best regards,

Alexis.B

Hello, I'd like to know which bistro chair is the most comfortable for a tall person (1m90) as it will be used in the kitchen. thank you

Hello,

We recommend the Cross chair. It has a higher backrest and is therefore more comfortable for taller people.

Best regards,

Alexis.B

Can this base be used for a 100 x 100 cm table?

Hello,

Unfortunately, this base is not compatible with table top 100x100 cm.

In the same style, we can recommend the DIGOIN GM base, which will be compatible thanks to its 60x60cm base.

Best regards,

Alexis.B

Hello What is the maximum supported weight?

Hello,

We do not have this information. However, the THEZAC stool is a product designed for intensive professional use.

It can therefore support all types of weight without difficulty.

Best regards,

Alexis.B

Hello, for a table top solid wood 150x80 does it make one or two bistro legs? Sincerely, Me Fontaine

Hello,

For a table top 150x80, you'll need two legs.

Best regards,

Alexis.B

Is this table top wood or stone? Or is it laminate with marble decor? Thanks

Hello,

The table top is a table top laminate with various decors (including marble) and gold banding.

Best regards,

Alexis.B

Hello Is this base suitable for a table top Hpl 120 x 70 cm. Thank you

Hello,

Yes, this base is suitable for a table top 120x70cm.

Best regards,

Alexis.B

Bonjour. Pour les chaises Fond, il est indiqué monté livré. Il n'y a donc aucun montage à faire à l'ouverture du colis?

Hello,

No assembly is required for products marked "delivered assembled"

Best regards,

Alexis.B

Hello. Where are Fons chairs made?

Hello,

The FONS chair is a European-made product.

Yours faithfully

Alexis.B

Hello, What is the maximum diameter of the table top supported by this foot please?

Hello,

On this base, you can put a table top 80x80 or round 80cm.

Best regards,

Alexis.B

Hello, I would like to know if the seat under the cushion is made of aluminum and the height of the armrest. Thank you very much. Have a nice day.

Hello,

Yes, the seat is made of aluminum. Here is a photo of the seat without the cushion:

The armrest height is 66cm.

Best regards,

Alexis.B

Are your eloise bar chairs upholstered in genuine leather or imitation leather?

Hello,

The upholstery on this model and on all products with reference 0061/ is made of genuine leather.

Best regards,

Alexis.B

I have a stand with 4 fixing points for the table top. The dimension between each point is 70 cm (side of the square formed by the 4 points) and the diagonal is 100 cm. For 1 table top MELUN BOIS Compact 10 mm D120 cm teinte chêne, is this foot a ...

Hello,

Please send me a photo and the exact dimensions of your base here: contact@richard-diffusion.com

Best regards,

Alexis.B

hello, do the chairs arrive assembled?

Hello,

Yes, DEBIRA chairs are delivered assembled.

Best regards,

Alexis.B

Hello, What gas should you use for your mosquito trap? Butane or Propane? Best regards,

Hello,

For the mosquito trap, you need to use co2.

Best regards,

Alexis.B

Hello, is the Thezac beech chair no longer available in beech? Only the black color is now visible on your site. Is a restocking planned?

Hello,

A restocking is planned for this product. We expect to receive it in June.

Best regards,

Alexis.B

can the table top melun pierre be adapted to an oak barrel empty of wine thank you

Hello,

You can order the table top Melun for use on a fut, however, our fastening system will not be suitable. You will have to glue or fix it yourself.

Best regards,

Alexis.B

Est ce du cuir véritable ou du cuir p u

Hello,

The leather on the Halsou chair is genuine leather.

Best regards,

Alexis.B

hello, is the rate shown for professionals? thank you

Hello,

We don't have rates reserved for professionals. We have chosen to display our best price directly.

Best regards,

Alexis.B

Are there other colors available for this model? Is it possible to order a different color?

Hello,

We currently have no other colors available for this model. Please note that all colors in stock are available on our website.

The next restocking should be scheduled for January 2026 (date to be confirmed)

New colors may be available at that time.

Best regards,

Alexis.B

Bjr Can you tell me how many kg this chair can support? Is it suitable for indoor use? Merci de votre retour

Hello,

We do not have this information. This product is a chair designed for intensive professional use. It can therefore support the heaviest weights without any problem.

It is intended for outdoor use.

Best regards,

Alexis.B

Hello, if I've understood correctly, it's nine chairs for one parcel

Hello,

The chairs are stacked. They are stacked by 9, so a "package" corresponds to 9 chairs.

Please note that the chairs are sold individually.

Best regards,

Alexis.B

Hello I have a bistro leg with 3 hooks, how to do with your pre-holed table mat ????

Hello,

If you would like table top to be drilled to match your base, you will need to send us the cross of the base or the whole base.

Otherwise, the holes may not be compatible.

Best regards,

Alexis.B

Votre magasin se trouve ou? Son t’il garanti ?

Hello,

We are located in Garons, 1350 Avenue de la Courbade (30128)

Our products are guaranteed for 2 years.

Best regards,

Alexis.B

Hello, I'd like to contact you to get some information about the MELUN UNI compact 10 mm trays in white laminated HPL. We'd be interested in 10 trays, but there seem to be only 6 in stock at the moment. Could you please tell us : The lead time for ...

Hello,

The table top Melun Uni color Polar White is being restocked.

We will receive them within 6 to 8 weeks (as an indication)

If you wish to order the 6 trays only, then the 4 others later, you can go directly to the website.

If you'd like to order the 10 trays now and receive them at the time of re-order, you can send us an email at contact@richard-diffusion.com

We currently have no table top plain white. We have table top REYNEL in Natural Elm Nordic which is very light but not plain white.

Best regards,

Alexis.B

does the Uzes green aluminium armchair come in any other color?

Hello,

We only have green on this model.

Best regards,

Alexis.B

what is the maximum armrest height of the Uzes aluminum armchair?

Hello,

The maximum height of the UZES armrest is 64.5cm

Best regards,

Alexis.B

Hello, do the trays attach to feet with cross-shaped fasteners?

Hello,

Yes, the trays can be attached to the feet with a cross. To do this, you need to use the insert kit.

Best regards,

Alexis.B

This genas chair is available in green. I found it on the site a few days ago. Is it out of stock please?

Hello,

The green model closest to the GENAS is the LELEX chair.

Best regards,

Alexis.B

Hello, I'm writing to you because I'm interested in the product: BARCY aluminium latte chair. Could you let me know if you'll have any new colors in the near future? (I saw gray, red and blue on the site last year, in addition to the yellow that's ...

Hello,

We do not have any replenishments planned with this supplier at the moment.

Yours faithfully

Alexis.B

Hello, do you have these 00670126VER chairs in yellow? Best regards Thomas

Hello,

We currently do not have this product in stock.

We have the possibility to order them but you have to respect the packaging (stack of 22, so you can order minimum 22, 44, 66, etc.)

We don't have any orders planned with this supplier at the moment. The lead time will therefore be quite long.

Best regards,

Alexis.B

What is the maximum weight your chairs can support? Thanks

Hello,

We do not have this information. However, our products are designed for intensive professional use.

The Martel chair will therefore be suitable for all your customers' body types.

Best regards,

Alexis.B

Hello, Do you know the seat density of this chair? As well as the Argancy please

Hello,

We generally work with 30 kg/m³ bases.

However, I cannot guarantee the exact density of this product.

Yours faithfully

Alexis.B

Hello, what is the Max square tray size for this base? Thanks Amandine

Hello,

For a 3-branch base, we recommend a max 60x60 tray. For a larger tray, you'll need a 4-branch base.

Best regards,

Alexis.B

Hello.. Do you sell by the unit? Thank you for your reply. Sincerely.

Hello,

All our products are sold individually. The price corresponds to the product alone.

Best regards,

Alexis.B

Hello, I have a base and would like to know if it is compatible with the melun pierre top. It has a cross with 2 fixing options, either with a 42cm gap between 2 fixings (diagonal), or one with a 14.5cm diagonal gap.

Hello,

On the face of it, given your information, the tray could be compatible. Can you send us a photo of your base and its cross by e-mail (contact@richard-diffusion.com) so that we can confirm the information?

Best regards,

Alexis.B

Hello, What is the finish of the Vernegues tabletop in light solid oak? Is it varnished, oiled or delivered raw? Thank you.

Hello,

The Vernègues plateau is varnished with a matt varnish.

Best regards,

Alexis.B

Hello, I'm looking to build a bistro-style table with a 70 cm diameter round top. Is the Venegues oak diam. 70 top compatible with the Trigueres high 3-leg base? If not, should I switch to a high 4-leg base for greater stability?

Hello,

Yes, I can confirm that the 70 round top is compatible with the Triguères 3-star base. Normally, 70 trays are used with 4-star bases, but the Triguères is a little wider and heavier than the others, so it's compatible.

Best regards,

Alexis.B

BONJOUR PEUT T'POSSER SUR UN FUT EN CHENE ET LE FIXER MERCI

Hello,

The fixings on the tray are not suitable for an oak barrel.

However, you can glue it in place.

Best regards,

Alexis.B

Is this tray still available in this color?

Hello,

I can't see which color I've selected. Could you please tell me?

All our products in stock are on our website. If you can't find it, the product is no longer in stock.

Best regards,

Alexis.B

Hello , I'm writing to you from Geneva, Switzerland. We are planning to open a terrace for our patisserie this summer. Our operations are about to be completed and we are currently looking for different alternatives for the furniture. The main col ...

Hello,

Here are some ideas for products (chairs and armchairs) in red/pink tones:

- NET Coral armchair : https://www.richard-diffusion.fr/en/fauteuil-exterieur/12141-fauteuil-net-polypropylene.html#/5436-couleur-corallo

- PARIS Marsala armchair : https://www.richard-diffusion.fr/en/fauteuil-exterieur/11739-fauteuil-paris-polypropylene.html

- CELY Red armchair : https://www.richard-diffusion.fr/en/fauteuil-exterieur/11847-fauteuil-lambach-aluminium-corde.html#/601-couleur-rouge/5950-tube-pc_23_010_rouge

- LISIEU Armchair Red/White : https://www.richard-diffusion.fr/en/fauteuil-exterieur/2695-fauteuil-lissieu-aluminium-tressage-nylon.html

- Fauteuil SKYPRO Marsala : https://www.richard-diffusion.fr/en/fauteuil-exterieur/9087-fauteuil-polypropylene.html#/5831-autres-marsala

- MOISSAC Chair Red / Black / White: https://www.richard-diffusion.fr/en/chaise-de-terrasse/10575-chaise-moissac-aluminium-rotin-tressage-nylon.html

- CROSS Chair Vintage red : https://www.richard-diffusion.fr/en/chaise-de-terrasse/2022-chaise-cross-alu-vintage-empilable-pour-pros-de-la-restauration.html

- BIT Coral chair: https://www.richard-diffusion.fr/en/chaise-de-terrasse/12142-chaise-bit-polypropylene.html#/5436-couleur-corallo

The prices shown on our website are our best prices.

As regards tops and bases, I'll let you have a look at what you might like directly on our site. For example, we have the TOURBES top in Rose, in Brick, or in ABET Lucida color, which might match.

Stock is updated in real time and indicated on the product sheet. Prices are also indicated. All our products are intended for intensive professional use and are therefore of good quality and durable.

Best regards,

Alexis.B

hello, which base do you recommend for a 120 * 120 melun pierre compact round tray?

Hello,

For a 120cm round top, we recommend the Brunet base, perfect for large outdoor tops.

Best regards,

Alexis.B

Hello, what are the dimensions of the legs on the ground and the length of the branches at the top? It would be for a 30cm wide table. I would like to check that the branches that attach to the table at the top do not protrude

Hello,

On the floor, the feet measure 50x48 cm

The cross is 47.5x47.5 cm

Best regards,

Alexis.B

Hello, I would like to know the thickness of the tray estal 3 wood mango please

Hello,

The Estal 3 tray is 3 cm thick.

Best regards,

Alexis.B

Hello, Do you make the Quissac stool in 65cm seat height please? Thank you

Hello,

No, we do not offer the Quissac stool in 65cm height.

Kind regards,

Alexis.B

Hello, do you do custom work for individuals? Would this model, with leather/imitation upholstery and a trunk seat that opens on top, be possible? Thank you for your feedback

Hello,

We do not offer custom-made models for individuals.

Kind regards,

Alexis.B

macon armchair: what is the height of the armrests (for passage under a table)?

Hello,

The maximum height of the armrests is 69cm

Sincerely

Alexis.B

Hello, what size and weight tray can this base accommodate? Thank you in advance for your reply

Hello,

This base can take a top of up to 70x70 cm for a square top and 80cm for a round top.

The weight doesn't matter, unless it's a very heavy top like real marble.

Best regards,

Alexis.B

bonjour; très jolie chaise! comment l'assise et le dossier sont accrochés au cadre de la chaise ... par des vis ou de la colle? y at il moyen de n'en commander que 4? merci de me répondre belle journée à vous

Hello,

The seat and backrest are attached to the chair frame with specific screws. There is therefore no risk.

There is no minimum order on our website. You can therefore order 4.

Best regards,

Alexis.B

Hello, does this base fit all trays? Thank you for your feedback

Hello,

Yes, this base is compatible with most of our trays. It all depends on the dimensions. For further information, please send us an e-mail to contact@richard-diffusion.com, specifying the model of tabletop you have chosen and its size. We'll then be able to give you a precise answer.

Best regards,

Alexis.B

Hello, what kind of table do you have with the Palmette chairs? Thank you for your feedback Claire

Hello,

I invite you to select a base and a top to compose your own table.

Legs : https://www.richard-diffusion.fr/en/1879-pietement-de-table-interieur

Tops : https://www.richard-diffusion.fr/en/1878-plateau-de-table-interieur

Best regards,

Alexis.B

Do you also have a solution for corner seating?

Hello,

We can supply made-to-measure benches. Please send your request by e-mail to contact@richard-diffusion.com

Best regards,

Alexis.B

Hello, I have a question about the product: "TRIVY GRAND 4 cast iron table leg (Reference 15730031NOIRGRA)" Would it be possible to order a spare part that is part of this product. It's the central flywheel that spreads and holds the 4 table legs ...

Hello,

After checking, we don't have any additional parts. You will need to order a table base.

Best regards,

Alexis.B

Can I order a fabric sample?

Hello,

For this type of request, please send us an email at contact@richard-diffusion.com

We may be able to send you a small piece of fabric

Best regards,

Alexis.B

Good evening Do you sell to individuals? Best regards

Hello,

Yes, private customers can order on our website.

Best regards,

Alexis.B

How heavy is the chair?

Hello,

The Montilliers armchair weighs 9.1 kg.

Best regards,

Alexis.B

Hello. For Reference 31780001KA, do you have the possibility of proposing other feet? Thank you for your reply. Best regards. Mrs Farina.

Hello,

Yes, we also offer oak-colored legs: https://www.richard-diffusion.fr/accessoire-de-salle-quincaillerie//12049-518891-accessoire-chene-massif.html#/197-autres-_/6009-teinte-chene_huile

Best regards,

Alexis.B

Hello, Are you going to restock the Azzana vintage chair in January? (only one available on your site) thank you in advance

Hello,

We received some last week. You can find them here : https://www.richard-diffusion.fr/chaise-de-salle//11711-577651-chaise-azzana-hetre-massif.html#/197-autres-_/5554-teinte-vintage_color

Best regards,

Alexis.B

Hello, I would like to know where the THEZAC beechwood chair was made (China? Europe?). Thank you for your help

Hello,

The Thezac chair is a European product.

Best regards,

Alexis.B

hello, is it possible to pay in three instalments at no extra cost?

Hello,

You can pay in instalments via Oney or Paypal.

Please note, however, that business cards are not accepted for this method of payment.

Best regards,

Alexis.B

What is the maximum WEIGHT it can support? I have people weighing over 120kg

Hello,

We do not have this information. However, our products are designed for intensive professional use, and are therefore suitable for people of all weights.

Best regards,

Alexis.B

what is the maximum weight it can support?

Hello,

We do not have this information. However, our products are designed for professional and intensive use.

The chair will therefore be able to bear a heavy weight.

Best regards,

Alexis.B

NAPOLEON polypropylene chair Reference 00670022OR Is it possible to ship 40 of these chairs to Valletta, Malta? Thank you very much. Sincerely, Clement.

Hello,

Yes, you can have your order delivered to Malta. Please send us your request by e-mail at contact@richard-diffusion.com

Best regards,

Alexis.B

Hello, is it possible to have this model in red Crlt,

Hello,

You can have this product in red. However, as it will be a made-to-order product, certain conditions will have to be met, so there will be a minimum order, and the price may be higher than for stock products. The lead time will also be longer

Best regards,

Alexis.B

Hello, which foot can be used for a 120 mm diameter round tray? Best regards

Hello,

For a 120 cm round top, you can use the Brunet base. You can also use the Guerande base, the Trivy Rectangle or the Trivy Grand for example.

Best regards,

Alexis.B

As a freelance decorator, I'm interested in 80 Tarif chairs? Are they stackable? What's available?

Hello,

The price displayed on our website is our best price. It's a single price valid for everyone, and is calculated as accurately as possible. We do not have prices for professionals.

Ales chairs are not stackable. If you would like an alternative, please email us at contact@richard-diffusion.com

Our stock is shown on our website.

Best regards,

Alexis.B

Is it possible to have a bench made to measure?

Hello,

Yes, it is possible to choose a made-to-measure bench seat. You can send us your request by e-mail at contact@richard-diffusion.com

Best regards,

Alexis.B

hello, can you give me the height between the seat and the footrest bar. thank you.

Hello,

The dimension between the seat height and the footrest is 39.5cm.

Best regards,

Alexis.B

I would like to receive a quotation for the reference below. We have already placed an order with you in the past. It is about 30 chairs for our new terrace. Please contact me by phone at 0032 484 040 605. Yours sincerely Nathalie Dewinter

Hello,

To get a quote, you can put the products in your shopping cart and click on the "transform this cart into a quote" button

This method is quicker and saves time in the process before placing the order. Alternatively, you can order directly from our website.

Best regards,

Alexis.B

Is this product available in 65cm seat height? Thank you

Hello,

This product is currently not available in 65cm height.

Best regards,

Alexis.B

Hello Do you sell to private customers? Does the droizy chair model exist in black leather and gilded steel? Best regards

Hello, yes, you can order on our website.

Concerning your request, no, we can't offer you this model at the moment.

Best regards,

Alexis.B

Is it possible to buy just one?

Hello,

Yes, it is possible to buy only one

Best regards,

Alexis.B

Hello, our table top hanging area is 45 by 45 cm. What is the width of the leg attachment system?

Hello,

The distance between the 2 fixing holes on the cross of the base is 42.5cm

Best regards,

Alexis.B

Hello I am looking for a malaga tray length 900mm /490mm Is the standard panel cut by you before shipping? Thanks in advance

Hello,

We don't do any cutting on this type of tray.

Yours faithfully

Alexis.B

DOES THIS PRODUCT EXIST IN BLACK?

Hello, we don't have it in black. Sincerely

DOES THIS MODEL EXIST WITHOUT A CUSHION, JUST A WOODEN SEAT? THANK YOU

Hello,

You can find this model without upholstered seat on our website, however, we only have it in vintage color: https://www.richard-diffusion.fr/tabouret-de-bar//11907-516796-tabouret-thezac-hetre-bois-courbe.html#/140-autres-_/5554-teinte-vintage_color

Best regards,

Alexis.B

Exact dimensions of the chair (h-L-l-Prof-Assise)

Hello,

Here are the dimensions of the Sevres chair:

- Height: 81cm

- Width: 49cm

- Depth: 58cm

- Seat height: 46cm

Best regards,

Alexis.B

IS IT POSSIBLE TO OPT FOR THIS PRODUCT WITH A LOWER SEAT HEIGHT OF 65 CM?

Hello,

We don't offer this product for sale. However, you can buy the stool in height 75cm and contact a carpenter, who will be able to cut the legs of the stool, in order to shorten it.

Best regards,

Alexis.B

Hello, I would like to buy the table leg end for this Reference 15590056NOMALU? Do you have this part?

Hello,

You'll find the cylinders here : https://www.richard-diffusion.fr/accessoire-de-salle-quincaillerie//11705-473610-stabilisteur-reglable-pour-pietement-verins-reglables-acier-polypropylene.html#/5534-dimensions-d26cm_h2cm/5969-taille-filtage_m8_h12cm

If you wish, you can also use this type of cylinder: https://www.richard-diffusion.fr/accessoire-de-terrasse//2739-72027-accessoire-verinflat-plastique-renforce.html#/3866-dimensions-m8

Best regards,

Alexis.B

Hello, the specifications of the chair indicate a seat height of 76 cm, is this a mistake? How many cm is the seat height? Best regards

Hello,

Indeed, there was an error on the dimensions of the chair. They have been corrected, the seat height is 47cm.

Best regards,

Alexis.B

Is this tray compatible with 3/4 cast-iron legs and what type of screw should I use? Thank you

Hello,

Yes, this tray is compatible with this type of base. However, for a 3-branch base, we recommend using a 60x60cm or Ø60cm tray. For a larger size, it's better to use a 4-branch base, to avoid tilting.

Best regards,

Alexis.B

Good evening, Could you tell me the drilling diameter and depth required to fit the inserts in the tray? Thank you in advance. Sincerely Hervé RIOU

Hello,

For drilling, you need to use 8mm drill bits.

Concerning the drilling depth, it will be 12mm for all trays, except for large trays like 110x70cm for example, where you'll have to drill at 14mm.

Best regards,

Alexis.B

Hello, I would like to place an order but I want to buy a green polypropylene cross chair. I can't find it anymore?

Hello,

If you no longer see an item, it is no longer available for sale. The stock is sold out.

Best regards,

Alexis.B

Bonjour j'aime le modèle Mâcon l'avez vous l'en noir et blanc merci

Hello,

The Macon model is currently only available in black. For any specific request, please send us an e-mail at contact@richard-diffusion.com

Best regards,

Alexis.B

Does this teak tray come in 90x90cm? Is delivery to Corsica possible ?

Hello,

We are currently restocking 80x80cm trays. This is the largest size we will receive on this type of tray.

We can deliver to Corsica.

Best regards,

Alexis.B

Hello, I'm looking for a bistro table with an 80 cm marble top. Is this possible? Thank you for your feedback

Hello,

I invite you to choose a table top here: https://www.richard-diffusion.fr/plateaux-de-terrasse-avec-cerclage-en-aluminium-dore-ou-laiton-pour-l-horeca/plateau-cerlce/2183

Then all you have to do is choose a table base to match the top.

Best regards,

Alexis.B

Hello, Can you get a table top model Melun stone and earth color steel in 140 cm round? Thank you. Best regards Richard.

Hello,

For this type of customized product, please send us your request by e-mail at contact@richard-diffusion.com

Best regards,

Alexis.B

Hello, it can carry a person up to how many kilos? thank you

Hello,

We don't have this information. However, you should know that this chair is a product specially designed for hotel and restaurant professionals. It is therefore suitable for intensive use and can support the weight of even the strongest people.

Best regards,

Alexis.B

Hello What is the maximum weight for the tray that will go on top? Mine is round, 80cm long and weighs about 20 kilos as it is a tiled concrete top. Sincerely JM

Hello,

For this type of base, we can assure you that they can support trays weighing up to around 17 kilos. For a 20-kilo tray, we can't guarantee 100% compatibility. We therefore advise you to use a cast-iron base.

Best regards,

Alexis.B

Can you glue the oak top? Thank you

Hello,

Yes, you can glue the tray.

Best regards,

Alexis.B

How much does the foot weigh? Sincerely

Hello,

The BISTROT 4 fixed cast aluminum base weighs 6 kg.

Best regards,

Alexis.B

Bjr, do you sell to individuals? Thank you for your answer

Hello,

Yes, as a private customer, you can order on our website.

Best regards,

Alexis.B

Hello, is it possible to have the dimensions of the cross please

Hello,

Here are the dimensions of the cross:

Best regards,

Alexis.B

Is it possible to order only 2 chairs?

Hello,

Yes, it's possible.

Best regards

Goodjours your colors of covering of chair in this model will they evolve? I seek blue

Hello,

We are not currently restocking this product. However, it's a model that works well and it's likely that we'll place another order with the supplier. You can send us your specific request by e-mail to contact@richard-diffusion.com

Otherwise, I invite you to keep an eye on our website, which is updated daily.

Best regards,

Alexis.B

Hello Is it possible to have it in a color? In this case in ultramarine blue anti-rust paint compatible with outdoor use?

Hello,

Please send your request by e-mail to contact@richard-diffusion.com

Please specify the desired quantities and the maximum delivery time.

Best regards,

Alexis.B

Hello, do you have Nardi Net stools in smaller sizes? Thank you for your reply

Hello,

We don't currently have any stock of this product, but it does exist and it is possible to work to order.

You will need to order a quantity that is a multiple of 4 (due to the factory packaging)

For more details (prices, lead times, etc.), please send us your request by e-mail to contact@richard-diffusion.com, specifying the quantities you require.

Best regards,

Alexis.B

Bjr being a private individual is it possible to buy this article? Will there be a restocking on the item?

Hello,

Yes, private customers can order on our website.

Restocking is not planned at the moment. However, we will be receiving a lot of new products. Please check our website regularly.

Best regards,

Alexis.B

Hello, could you send me a photo of the tray in situation (not the photos on the site) because I do not realize the intensity of color and shades. Thank you

Hello,

I'll send it to you later today.

Sincerely

Alexis.B

Is the tilting system of the tray resistant and does it guarantee a good stability of the tray? Thank you

Hello,

The BISTROT 3 base is a product designed for intensive professional use. I can therefore confirm that the base's tilting system is resistant and the tabletop stable.

Best regards,

Alexis.B

it says pearl black when the photo is rather taupe / beige can you confirm what color the item is please?

Hello,

I can confirm that the color is taupe. There has been a translation error.

Best regards,

Alexis.B

I've ordered on the website, will I be informed when my order has left?

Once you have confirmed your order on our website, our team takes care of its preparation. Once your order has been dispatched, you will receive an e-mail informing you that it has left our premises. You will then be contacted by the carrier in charge of delivery to arrange an appointment.

As long as you have not received the dispatch e-mail, the order is still being prepared. Delivery times may be slightly longer during busy periods.

Hello, on the description it says unit per package: 4. I would like to know if there is only one chair or 4 please?

Hello,

The packages are delivered to us by our supplier in boxes of 4. However, they are sold individually on our site. The price shown is for a single piece.

Best regards,

Alexis.B

Hello. This reference has the feature "With adjustable bolts", as does the 72cm model (ref 19740006NOI300). What are the minimum and maximum heights of these two products?

Hello,

The jacks are slightly adjustable in height. However, they hardly change the total height of a base. 72cm is the height with the jacks set at minimum, and the legs can be raised to around 73cm.

Best regards,

Alexis.B

Hello, is it possible to customize/silkscreen the terrace wicker chairs? Si oui tarifs svp Merci

Hello,

For aluminum rattan products, we can work to order for customized products. You can choose the desired weave and color. Please note, however, that there is a minimum quantity required, and lead times can be long.

To find out more about our prices, please send us an e-mail to contact@richard-diffusion.com, specifying the type of product you want (or an inspiration), the color, the quantity and the desired delivery date for your project.

Best regards,

Alexis.B

Hello, I would like to have 8 Aressy chairs in steel upholstered, unfortunately I see that only 5 products are available. Are you going to obtain additional stock or is this the end of the range? I look forward to hearing from you, Clémence RITTE ...

Hello,

Our entire stock is displayed on our website. No restocking is planned for this product. I invite you to visit the category "Chaise de salle" of our website to find an alternative that pleases you.

I wish you a nice day as well.

Best regards,

Alexis.B

Hello, I would like to know if the chairs are black or very dark oak (I'm looking for dark oak chairs)

Hello,

SCOL chairs are in very dark oak.

Best regards,

Alexis.B

Hello I'm looking for a tray that can go outside and stay there all year round at 800 m altitude. Do you think it's suitable? I already have table legs. Is it possible to drill holes in the tray to adapt it to the table legs and fit screws? Thank ...

Hello,

Yes, the FANTASY tray is compatible with your request.

To drill the top:

Option 1: you buy the legs from us. You will then need to choose the POSE ET FOURNITURE INSERTS fastening kit at 10€. We'll then drill your trays, and all you have to do is assemble the base with the tray.

Option 2: If you already have your bases and are a bit of a handyman, you can choose the KIT 4 INSERTS SUPPLY fixing kit at 4€50. We supply the appropriate screws and bolts, and it's up to you to drill the holes in your trays.

Option 3: You already own the legs, but would like us to fit the inserts in our workshop: you must choose the FIXING AND SUPPLY INSERTS kit at 10€ and send us one of the crosses of your legs. We'll then be able to drill your tray correctly.

Best regards,

Alexis.B

Hello. I have a VEGA iron table leg with a 78 cm top. Is it compatible with your 70 x 70 or 110 x 70 top? Thank you

Hello,

Can you send us the name of the VEGA base you have? Or a photo? So that we can check compatibility.

You can send it to us at contact@richard-diffusion.com

Best regards,

Alexis.B

is the color matte black? or gloss black? thanks

Hello,

The color of the MAYAC chair is shiny black.

Best regards,

Alexis.B

Do fabrics have fire-resistance certificates?

Hello,

For the Kappelen chair (and most of our products), RIVIERA fabric is certified fireproof (m2 equivalent)

IBIS fabric is also fireproof. MONOLITH fabric is not fireproof.

Yours faithfully

Alexis.B

Good evening, Do you have a restocking date for these chairs? Thank you DG

Hello,

We don't have any reorders planned for this product at the moment. However, we will be receiving many new products in the coming months. I invite you to consult our website regularly to make sure you don't miss them.

Best regards,

Alexis.B

Products just for professionals or can individuals buy?

Hello,

Private customers can order on our website.

Best regards,

Alexis.B

Hello, what type of foot should I choose for a 120 cm tray? Or 100 cm? Thank you!

Hello, thank you for your question.

For a 120cm top, we recommend the Brunet base.

For a 100cm top, we recommend the Brunet base or the Anglade base for indoor use.

Best regards,

Alexis.B

Hello, Could you tell me if the AIR Stool 65 CM polypropylene REFERENCE 00670052NR is sold in a set of 4 or only 1 stool? Thank you in advance

Hello and thank you for your question!

The AIR 65 cm stool is sold individually, but we receive them in cartons of 4 stools.

Hello, I would like to put it on a barrel, is it possible to screw it?

Hello, thank you for your question.

As you can see from the photos, the tray has a grooved system on the back. We would advise you to glue it in place for better fixing.

Best regards,

Alexis.B

These chairs are stackable, but how many can be put on top of each other?

Hello, thank you for your question.

These chairs are stackable. You can put about 6 on top of each other.

Best regards,

Alexis.B

Hello, What is the load capacity of this Acapulco chair? Sincerely, Jean Louis Marquette

Hello, thank you for your question.

We do not have this information. However, our products are designed for intensive professional use. So there will be no problem for the strongest people.

Best regards,

Alexis.B

Hello, What is the maximum height of the arms, to know if they go under the table or on the table? Thanks

Hello, thank you for your question.

At the highest point, the height of the armrests is 74.5cm.

Best regards,

Alexis.B

Hello, Do you sell to individuals? Thank you in advance for your reply. Sincerely -

Hello, thank you for your question.

Yes, we sell to private individuals via our website.

Best regards,

Alexis.B

Hello, what is the weight of a CROSS polypropylene chair, REFERENCE 00670163BLA? Also, is it possible to place an order without being a catering professional? Thank you in advance for your reply. Sincerely, Nathalie Denis

Hello, thank you for your question.

The Cross polypropylene chair weighs 3 kilos.

You can place an order as a private individual via the website.

Best regards,

Alexis.B

Hello, when will there be more stock? Thanks in advance

Hello, thank you for your question.

Restocking is scheduled for the second half of June.

Best regards,

Alexis.B

Hello, I might be interested but I have a lot to take. Is it possible to have a promo code please? Thank you for your understanding

Hello, thank you for your question.

We don't offer promo codes. The field exists on our site for people benefiting from a credit, issued in certain cases.

Best regards,

Alexis.B

Do you have a coupon code to send me by e-mail if I take 4? What is the material of the seat? (Leather or synthetic) Thanks in advance!

Hello, thank you for your question.

We don't have any promo codes at the moment.

The stool is in solid beech, and the seat is in PU (polyurethane)

Best regards,

Alexis.B

I would like to know the width between the armrests at the front of the seat, thank you

Hello, thank you for your question.

The width between the armrests at the front is 45cm.

Best regards,

Alexis.B

Hello I wanted to know if it was possible to buy the table DIEPPE metal solid wood without the top Crdlt

Hello, thank you for your question.

Unfortunately, it is not possible to buy the Dieppe table without the top.

However, the table is delivered in 2 separate parts. You can therefore use only the legs if you wish.

Best regards,

Alexis.B

good morning Can we put on this base the perpignan tray diameter 90 cm thank you

Hello, thank you for your question.

Yes, it's quite possible to use a Perpignan R90 top with a Targon base.

Best regards,

Alexis.B

bonjour Can I use this Grigny steel base with the round perpignan 90cm diameter top? What do I need to add to fix them? Thanks

Hello, thank you for your question.

The Grigny base is not compatible with the Perpignan R90cm top. It is too light.

We can offer you the Anglade base or the Targon base.

To attach them, you need to choose an insert kit.

- Installation and supply of inserts: we drill your trays and install the inserts in our workshop before dispatching the goods.

- Kit inserts supply: we send you the appropriate inserts, and it's up to you to drill your trays to install them.

Best regards,

Alexis.B

Hello, are the Leroy melamine trays Ref:30940001PS 60x60 out of stock? Because the website shows me 7 available and I need 8 if possible? If so, what is the delivery time? Sincerely

Hello, thank you for your question.

The figure shown on the website corresponds to our actual stock. We only have 7 trays for sale.

If you order from stock, the delivery time is about 15 days.

Best regards,

Alexis.B

Bonjour quel pietement recillez vous pour le plateau perpignan rond diamètre 90 et 70 cm Merci

Hello, thank you for your question.

For the Perpignan top in R70cm, you can choose the base you want.

For the R90cm Perpignan top, we recommend the Anglade base. You can choose the smaller model for the R70 and the larger model for the R90, for example.

Best regards,

Alexis.B

Hello, are Beausoleil aluminium chairs stackable?

Hello, thank you for your question.

Yes, Beausoleil aluminum chairs are stackable.

Best regards,

Alexis.B

Hello Do you still have the Tommen round steel base for the 90 cm perpignan oak top. I can't find it on the websites

Hello, thank you for your question.

If a product is no longer on the site, it means that it is no longer available for sale. The stock is therefore sold out.

Best regards,

Alexis.B

Hello. I have a wooden top 2m long, 0.70cm wide and 3.8cm thick. Can I adapt 2 bistro table legs with your insert kit? Thank you

Hello, thank you for your question.

For a 2m long tray, you'll need 3 Bistrot legs, not 2.

You can then adapt them to your tray with our insert kit.

Best regards,

Alexis.B

Hello Which foot should I use for the 140x4cm thick (round) tray?

Hello, thank you for your question.

For the Calvi round top 140cm, 4cm thick, we strongly recommend the Tommen round base

Best regards,

Alexis.B

Hello I'm interested in the tray but I can't see how to attach it to the base I already have

Hello, thank you for your question.

To attach a Lambesc tray to a base you already have, you need to buy an Insert Kit. As you already have the base, we can supply the inserts with the tray, then you'll need to drill the tray and fix the inserts yourself. You'll then need to assemble your tray with your base using the nuts and bolts supplied.

Best regards,

Alexis.B

is it possible to have the 325x41.5 cm tray? thank you

Hello, thank you for your question.

At present, we cannot supply this tray in these dimensions.

Best regards,

Alexis.B

Can you give me the steps to mount the Brunet foot? Thank you.

Hello,

We have information sheets on how to assemble certain bases. I'll send you one, by e-mail, similar to the assembly technique for the Brunet base.

However, if you still can't do it, don't hesitate to call us and ask for the workshop. They'll explain the process to you.

Best regards,

Alexis.B

The 4 small adjustable table legs under the round? Delivery in Switzerland possible?

Hello, thank you for your question.

The little jacks under the base are slightly adjustable.

Yes, we can deliver in Switzerland.

Best regards,

Alexis.B

bonjour what is the difference with the PELISSANNE Tray abs gold edges alu melamine gloss? merci

Hello, thank you for your question.

The Amirat top is a square-edged melamine top. It has a matte finish and the edge of the tray is a gold imitation aluminum sheet.

The Pelissanne tray is also a melamine tray, but with rounded edges. It has a high-gloss finish and a higher-gloss edge, also in gold.

The quality of the trays is equivalent, it's mainly a question of preference.

Best regards,

Alexis.B

What is the maximum tray size we can put on these legs and still keep it stable? Thank you for your feedback

Hello, thank you for your question.

On the Diamand base, you can fit a tray with a maximum size of 140x80cm.

Best regards,

Alexis.B

How do you attach the tray to the stand? Do you have an assembly sketch? Thank you for your help.

To attach a tray to this stand, you'll need to order an insert kit.

2 options are available:

- Kit of 4 self-mounting inserts: inserts are supplied according to your order. You'll then need to drill holes in your platter to fit the inserts. In the case of a compact tray, we supply a square-head screw, which you'll need to slide into the groove.

- Installation and supply of Inserts Kit: we take care of drilling your trays to fit your inserts. All that's left to do is assemble your base and top.

We can provide you with an assembly sheet for your bases.

Best regards,

Alexis.B

Hello can you make me an offer for 31 feet and give me the delivery date? Thanks in advance Martial

Hello, thank you for your question.

With the ever-increasing competition and all the constraints we may encounter, we have chosen to display our best prices on our website.

I therefore invite you to put the 31 legs in your basket, and to proceed with the ordering process. Once you've entered your address, delivery charges will be calculated and displayed.

Best regards,

Alexis.B

Hello, I'm planning to install a table top on an old base. Do I need to provide you with a plan for mounting the fixing kit? Thank you very much. JJ Rivillon

Hello, thank you for your question.

If you would like us to fit the fixing kit, you need to select the kit "Installation and supply of insert kit" and send us the cross of your base. Without this, we won't be able to fit the insert kit to the tray.

If you can't/won't send us the cross, you can select the "Supply Kit Inserts" kit and we'll send you the inserts, which you'll then have to fit.

Best regards,

Alexis.B

Hello I would like to know the distance between the front legs as I only have a width of 39 cms between the legs of my table. Also, do you offer a darker brown color? How long does it take from order to delivery in France? Is the chair already ass ...

Hello, thank you for your question.

At its widest, the spacing between the front legs is 39cm.

The height of the armrests is 74.5cm at the highest and 71cm at the lowest.

For a darker color, we can offer you Dark Brown Oiled

For delivery in France, you can expect delivery within two weeks of payment.

Yes, the chair is delivered assembled.

Best regards,

Alexis.B

Hello, with which screws should the trays be fixed?

Hello, thank you for your question.

To fix your tops, you can order Kit Inserts.

When placing your order, you need to order one insert kit per table (1 leg + 1 top = 1 insert kit, 2 for 2 and so on)

INSERT KIT INSTALLATION AND SUPPLY: our team will install your inserts on your table tops, in our workshop, before your goods leave.

KIT OF 4 INSERTS TO BE ATTACHED YOURSELF: it's up to you to drill your trays to fit the inserts. For compact trays, there's nothing to drill, just slide the inserts into the grooves.

Best regards,

Alexis.B

Hello, to match this base with the Melun Pierre top, do I need to add a screw or fastener kit or is it included with the base? Thank you.

Hello, thank you for your question.

To combine a base and a top, you need to add an INSERTS KIT.

There are 2 solutions:

- Attachment to your trays INSTALLATION AND SUPPLY INSERTS KIT: our team drills your trays and positions the inserts. All you have to do is assemble your tray and base.

- SUPPLY OF KIT OF 4 INSERTS TO BE ATTACHED YOURSELF: we supply the screws, but you have to drill your tray to fit the inserts.

Best regards,

Alexis.B

Hello Concerning the Quimper stool, can you tell me the maximum weight it can support. I'm interested in this article. Best regards.

Hello, thank you for your question.

Unfortunately, we do not have this information. The Quimper stool is a product designed for professional and intensive use. It is therefore sturdy and resistant.

Best regards,

Alexis.B

Hello, I'm interested in the Quimper model, but is it available in other colors? And what is the delivery time? Thank you in advance for your reply.

Hello, thank you for your question.

The colors available are those shown on our website. There are no other colors available for this model.

Best regards,

Alexis.B

Hello, is there a chair version of the GREZAC bench? Cdlt Jérôme

Hello, thank you for your question. The Ferran chair and the Jonval chair are similar to the Grezac bench. We don't have an exact match.

Best regards,

Alexis.B

Is there a minimum of 1 to buy? I'm not a restaurateur but a farmer, it's for 1 gite

Hello, thank you for your question.

There is no minimum order on our website for products in stock. You can order as you wish.

Best regards,

Alexis.B

Hi, I'm thinking of buying this base for a 150 by 70 slate top weighing about 50kg. Is it suitable? Thanks in advance

Hello, thank you for your question.

The Guerande base will not be suitable for such a large top.

For a 150x70 top, we advise you to use 2 legs, the Tommen for example, or another of your choice.

Best regards,

Alexis.B

Hello, how do you fix outdoor table tops to a cast-iron base? Are there any predefined holes?

Hello, thank you for your question.

The crosses on our bases do indeed have predefined holes. All you need to do is order an INSERT KIT with your tray and base. This fastening system will enable you to easily attach your trays to your bases.

If you're a bit of a handyman, you can order the INSERT KIT SUPPLY package. In this case, you'll need to drill your trays and fit the inserts yourself.

Alternatively, you can order the INSERTS KIT INSTALLATION PACKAGE. In this case, we will drill your trays and install your inserts in our workshop before shipment.

Best regards,

Alexis.B

Hello, I am going to order these products Ref : 0580118NOINOI Réf .Sp:ESN-13 3665863028966 However, first I need a Certificate of reaction to fire or combustibility. Could you please send it to me. Thank you...Have a nice day ..

Hello, thank you for your question.

Wood and steel products are M1 fireproof by nature. We do not have certificates for these products. The only products for which we have certificates are velvet products.

Yours faithfully

Alexis.B

Hello, If we want a round tray for this encroachment, what diameter should we choose? Thanks in advance

Hello, thank you for your question.

For a Bistro Haut 3 base, you can use a top up to Ø70cm.

Best regards,

Alexis.B

Hello Are these legs equipped with adjustment jacks to guarantee stability on uneven ground?

Hello, thank you for your question.

Yes, the Epine base is equipped with adjustable jacks.

Best regards,

Alexis.B

Hello. What are the recommendations for attaching a tray to this type of stand? Should it simply be screwed in, or should it be pegged, or should screw threads or jacks be incorporated into the tray design?

Hello, thank you for your question.

We can offer you KIT INSERTS to fix your tray to your base.

However, the type of inserts depends on the tray: for compact trays, you'll need square-head inserts. For others, conventional inserts.

If you order a leg and top set on our site, you'll need to add the POSE package or the SUPPLY kit inserts package. Our teams will supply you with the appropriate inserts.

If you order only the base, please add the SUPPLY kit inserts package and specify the type of tray you have.

Best regards,

Alexis.B

Hello Do you have any grey stacking outdoor bistro chairs with dark brown legs? If so, at what price (quantity 4) with shipping costs to LESQUIN 59810?

Hello, thank you for your question.

You can find all the products we have in stock on our website.

To find outdoor bistro chairs, please go to "outdoor furniture" --> "terrace chairs" or via the following link: https://www.richard-diffusion.fr/chaise-exterieur-pour-professionnel-chaise-de-terrasse-et-mobilier-chr/chaise-de-terrasse/1830

Best regards,

Alexis.B

Hi, I'm interested in the Melun table top, color 0511 MT Florentine Marble, but I can't distinguish the color, is it green? Thank you

Hello, thank you for your question.

The Florentine Marble color corresponds to green marble.

Best regards,

Alexis.B

Hello, I would like to order two palmette stools made of bentwood stained black and oiled. Unfortunately the products are unavailable, will you have any other stock? Best regards, Julie Rodriguez

Hello, thank you for your question.

It's true that we only have one stool left in "Black Oil Beach". However, we also have one left in "Black Oil Beach" and the colors are the same. You can then select the last stool in each color to get two quickly.

We're also currently restocking. We'll be receiving them in May.

Best regards,

Alexis.B

Hello, I would like to know the possible heights of the TARGON steel table leg. It says 72cm but it can also be lowered?

Hello, thank you for your question.

It is not possible to reduce the size of the base. It is 72cm high.

Best regards,

Alexis.B

Could you tell me the dimensions of the seat (width and depth) of the MARCELXL armchair. Thank you for your help.

Hello, thank you for your question.

Here are the complete dimensions of the Marcel XL armchair:

- Width: 57cm

- Seat width: 41cm

- Seat depth: 53cm

- Seat depth: 40cm

- Height: 85cm

- Seat height: 44cm

Yours sincerely

Alexis.B

Hello, Are the palmette, vernay and parisot chairs stackable? Thank you

Hello, thank you for your question.

No, Palmette, Vernay and Parisot chairs are not stackable.

Best regards,

Alexis.B

Hello, I would like to know if this tray can be used with the AUBIN table base

Hello, thank you for your question.

Yes, the MELUN top is compatible with the AUBIN base.

Best regards,

Alexis.B

Not professional but private I can buy?

Hello, thank you for your question.

Yes, private customers can order from our website, while stocks last.

Best regards,

Alexis.B

Good evening Is a TOMMEN base sufficient for the 115 x70 CUZAC oak tops? Also, is this leg compatible with this type of tray; is it delivered ready to be mounted on this type of leg? Thank you for your feedback

Hello,

For the 115x70 CUZAC tops, you can choose the TOMMEN rectangular base. This base will be compatible.

For the tray to be delivered ready for assembly, you need to choose the POSE KIT INSERT fixing package. The tray will then be drilled and inserts will be affixed, so all you have to do is assemble your base and tray.

Best regards,

Alexis.B

In the description it says "adjustable cylinders"...??

Hello, thank you for your question.

In fact, the base has 4 adjustable jacks under the base, for greater stability.

If your floor is not straight, you can adjust the jacks to prevent the base from wobbling.

Best regards,

Alexis.B

Hello, are the lodeve cognac chairs stackable? Merci bonne journée

Hello, thank you for your question.

Lodève chairs are not stackable.

Best regards,

Alexis.B

Hello, how much weight can a person sit on, are they solid?

Hello, thank you for your question.

We don't have this information. Our furniture is designed for the catering trade and is therefore intended for intensive use. LANTAN chairs are therefore very sturdy.

Best regards,

Alexis.B

Chaises fons chene clair, What weight can it support. Thanks Cordially

Hello, thank you for your question.

We don't have this information. Our furniture is designed for CHR professionals and is therefore intended for intensive use.

Best regards,

Alexis.B

Are there any other colors to order?

Hello, thank you for your question.

It is possible to choose a new color for this article. You need to order a minimum of 70 pieces, in groups, and the order must be validated quickly in order to meet a lead time of about 4 months. Please contact us on 04 66 23 86 91 or by e-mail on contact@richard-diffusion.com

Best regards,

Alexis.B

Hello. In which country is the PALMETTE chair manufactured? Thank you for your answer

Hello, thank you for your question.

As indicated on our website, the Palmette armchair is a European-made product.

Best regards,

Alexis.B

Hello, Is the factory outlet open to private customers? Are you open on Wednesday, January 3rd? Many thanks Cordially

Hello, thank you for your question.

Our products are intended for CHR professionals. However, you can place an order on our website as a private individual. You can also come and see what we have in stock.

We were closed for the end-of-year vacations and are now open from Monday to Friday.

Best regards,

Alexis.B

Hello, I already have the marble top. How can I fix it? Do you deliver to your home? Best regards

Hello, thank you for your question.

To fix your tray, you can add the Inserts Kit to your order. In the comments field of your order, you'll need to tell us what type of tray you have, as well as its characteristics (dimensions, material) so that we can provide you with the right screws for your tray foot assembly. Yes, we can deliver to your home.

Best regards,

Alexis.B

Other color than olive green??? I would like gypsy blue, is that possible???

Hello, thank you for your question.

The blue color does not exist on this product. There are 6 colors for this model: anthracite, white, marsala, black, taupe and olive green.

We are currently out of stock.

Yours faithfully

Alexis.B

Hello. Is this base suitable for 80*80 tops? Best regards,

Hello, thank you for your question.

The AUBIN base is compatible with an 80x80cm top.

Best regards,

Alexis.B

Hello, is this base compatible with a 100cm diameter round top? Yours faithfully

Hello, thank you for your question.

The Gajan base is not compatible with a Ø100 tray. We recommend a maximum Ø80cm top with this base. Otherwise, we can recommend the Tommen base Ø60 to go with a Ø100cm top.

Best regards,

Alexis.B

what is the chair upholstery made of?

Hello, thank you for your question.

The Kappelen chair has a wooden frame, upholstered with foam and covered in imitation leather or velvet, depending on the model selected.

Best regards,

Alexis.B

Is this tray compatible with the BANGOR 4-star aluminum base? Thank you

Hello, thank you for your question.

I can confirm that the BANGOR base is compatible with a compact tray.

Best regards,

Alexis.B

Hello, are they suitable for your product : RETRO4G1900 cast aluminium 4 legs base (Selection : BLACK EPOXY). Thank you

Hello, thank you for your question.

The adjustable cylinders, with M8 threading, are suitable for the Retro 4G1900 base.

Best regards,

Alexis.B

Is it possible to make 2 things to order: - a more padded seat with quality foam for customers who sit for 3 hours - a backrest like the existing seat in the photos. Instead of rattan. For greater comfort. - Requests for a possible order of 11 sto ...

Hello, thank you for your question.

For all custom orders, please contact us by telephone on 04 66 23 86 91 or by e-mail at contact@richard-diffusion.com

Please note that for all custom orders, a lead time may apply, which varies according to your request.

Best regards,

Alexis.B

Hello, does it exist in 65cm height?

Hello, thank you for your question.

For the Thezac G stool in 65cm height, we need to ask our supplier if they can produce it or not.

The minimum order is 30 pieces and the lead time is about 3 months.

Best regards,

Alexis.B

can you get it in height 88 cm thank you for 30 feet the 4.27 coustellet

Hello, thank you for your question.

We can supply the Vedene base in 88cm height. To do this, we make a cut in our workshop according to your desired dimensions. However, this is only done on our stock parts.

Best regards,

Alexis.B

Where is your point of sale or product display?

Hello, thank you for your question.

Our showroom is located in Garons, within the Zone Mitra, at 1350 Avenue de la Courbade, 30128 Garons

Best regards,

Alexis.B

For tilting legs, what is the maximum possible size for a round top? Thanks Cordially

Hello, thank you for your question.

For a 4-leg tilt base, logically, you can go up to Ø70cm. However, Ø80cm tops may also be suitable.

Best regards,

Alexis.B

Hello, the color of the QUISSACG solid beech stools, black oiled, corresponds to what is shown on the presentation photo. Best regards

Hello, thank you for your question.

The color of the black oiled QuissacG stools matches the photo.

Best regards,

Alexis.B

i'm not a professional caterer, so can I order Quimper stools from your site? Thank you for your reply.

Hello, thank you for your question.

Private customers can order on our website.

Best regards,

Alexis.B

Free return?

Hello, thank you for your question.

Return shipping costs are at the customer's expense. Shipping costs will also be deducted from the refund.

Refunds are eligible subject to receipt in the original packaging, with the product unused and therefore in new condition.

Yours faithfully

Alexis.B

i would like to know the height of the seat from the floor or which model of chair to choose

Hello, thank you for your question.
The seat height on this product is 45cm.

Best regards,

Alexis.B

REFERENCE 00580011DBROWNNOI Hello, I would like to know if you could lower the seats to 70 cm. I would like to order 4 if possible. Thank you

Hello, thank you for your question.

For a total of 4 pieces, we can't lower the seats. I invite you to contact a carpenter who will be able to cut the stool.

Best regards,

Alexis.B

Hello, which tray is this suitable for?

Hello, thank you for your question.

The Galiax 4 base is suitable for 70x70 trays and possibly some 80x80 trays.

The Galiax 3 is suitable for 60x60 tops.

Best regards,

Alexis.B

Does this model come in cream and brown?

Hello, thank you for your question.

Yes, you can choose the color of the BERNAY chair at your convenience. This is done to order with a minimum of 50 pieces and a lead time of 5 to 6 months for this supplier.

Best regards,

Alexis.B

Hello, on the ad, you indicate that the seat height is 51 cm, but on the sketch sent in response to an Internet user, it says 48 cm. We're looking for bistro chairs with a seat height of around 55 cm. What's more, there's no indication of the mate ...

Hello, thank you for your question.

After checking, the seat height is indeed 51cm. The 48cm corresponds to the seat height excluding the upholstered part. The upholstery material is PU Simili dolaro.

Best regards,

Alexis.B

An 80 cm square tray is suitable for this type of stand?

Hello, thank you for your question.

For an 80x80 top, the GAJAN base will be slightly too small. We recommend the ORLEAT leg, with a square base.

Best regards,

Alexis.B

Is the cushion included in the 78cm seat height?

Hello, thank you for your question.

Yes, the seat covering is included in the dimensions listed on the site.

Best regards,

Alexis.B

Hello, what type and size of screws should I use to secure the tray to the stand? Best regards

Hello, thank you for your question.

To attach the tray to the stand, you need to choose an insert kit. The service that prepares your order will take care of fitting the inserts to your tray. You need to choose one kit for each tray/foot assembly.

Best regards,

Alexis.B

Hello Please measure the seat depth and width as well as the width of the front legs (from outer edge to outer edge) Thank you

Hello, thank you for your question.

Here are the complete dimensions of the Crozet chair.

Best regards,

Alexis.B

hello, concerning the product : REFERENCE 00580011DBROWNNOI is it possible to ask you for the seat cover in bright green instead of black by paying a supplement?...if not can you tell me if it is possible to lift the cover to change the upholstery ...

Hello, thank you for your question.

We can only work on custom-made products for professional projects. There will therefore be a minimum order of about 20 pieces and the lead time will be about 8 weeks.

However, it is possible to dismantle the seat to change its covering if you wish.

Best regards,

Alexis.B

Parisot chair beech bentwood vintage. Hello, can you specify the overall measurement separating the 2 front legs (from edge to edge outside legs) and the maximum width of the seat that must pass between 2 narrow legs of our table (41.5cm) Thank yo ...

Hello, thank you for your question

Here are the measurements:

Best regards,

Alexis.B

Hello, what color should I choose to have this bar chair in very light wood as shown in the first photo?

Hello, thank you for your question.

You have to choose the color "black oiled" to have the chair in light wood.

Best regards

Is it possible to make it in 250X95cm? If so, at what price please?

Hello, thank you for your question.

Unfortunately, it's not possible for us to supply these dimensions for this type of tray. However, it is possible to obtain them in compact or solid wood, but the price will be higher.

Best regards,

Alexis.B

Do you have a model with armrests for a bentwood high stool?

Hello, thank you for your question.

We can indeed offer you stools with armrests. However, this will depend on the quantities required. Please send us an e-mail to contact@richard-diffusion.com to discuss your request further.

Best regards,

Alexis.B

Hello, I would like to renew the top of my round bistro tables I chose the round model diameter 60 cm it seems that you do not have any in stock, I would like 7 Think you have 7 for when? Thank you for your reply

Hello, thank you for your question.

Unfortunately, the next availability for the LAMBESC trays is scheduled for around March 2024.

Yours faithfully

Alexis.B

Hello, Will the Morlaix chair model in light wood color be restocked soon? Thank you in advance, Sincerely, Camille WEBER

Hello, thank you for your question.

We will receive an identical model at the beginning of October. I invite you to watch our website and follow the Thézac model.

Best regards,

Alexis.B

Hello, Is it possible to have the Autrac chair in black and white (rather than brown and white)?

Hello, thank you for your question.

It is possible to have the Autrac chair in black and white. It will depend on the number of chairs you want and the order will be grouped with a lead time of 5 to 6 weeks.

Best regards,

Alexis.B

hello how many chairs can be stacked thank you

Hello, thank you for your question.

We receive these chairs in stacks of 10, so they can be stacked 10-high, but the stack size will be larger.

Best regards,

Alexis.B

Do you have a 130 cm sheesham tray in stock to check the surface and edge before ordering? Thank you

Hello, thank you for your question.

We have a Ø130 cm tray in stock. You can see it on our website. I can also provide you with more photos on request. It can also be viewed in our showroom at 1350 Avenue de la Courbade, 30128 Garons.

Best regards,

Alexis.B

Hello Where are these chairs made please Thank you

Hello, thank you for your question.

The Abrest chair is a product manufactured in Asia, as you can see on our website.

Best regards,

Alexis.B

Hello I would like to know if we can put a round tray 80 cm please Thank you

Hello, thank you for your question.

Yes, the Tommen round base supports a Ø80cm tray.

Best regards,

Alexis.B

Hello, we are wholesalers of Horeca/CHR equipment in Brussels. Do you have a distributor price list? Thank you

Hello, thank you for your question.

The rates displayed on our website are the best. We have decided to optimize them for strategic reasons.

Best regards,

Alexis.B

Hello, I was interested in chairs, do you make a special offer if I take 22?

Hello, thank you for your question.

As the competition is getting tougher and tougher, and to deal with some of the problems associated with online sales, we've decided to display our best prices directly.

Best regards,

Alexis.B

Good evening Can we order as a private individual? Thank you for your reply

Hello, thank you for your question.

As an individual, you can order our products, but only via our website.

Best regards,

Alexis.B

Is there a matching chair?

Hello, thank you for your question.

The chair matching the LISSIEU armchair does not exist. However, you can find various similar products on our website, such as the Bernay chair.

Best regards,

Alexis.B

How high are the armrests?

Hello, thank you for your question.

The height of the armrests is 66cm.

Best regards,

Alexis.B

Do you have other colors

Hello, thank you for your question.

We will be receiving 4 new colors for the Colomiers armchair in the coming weeks.

Best regards,

Alexis.B

Hello, is it possible to fit a 120x70 top? If not, do you have a more suitable central base reference?

Hello, thank you for your question.

The GRIGNY base is not suitable for a 120x70 cm top. For this, we recommend the TOMMEN rectangular base.

You can also use two legs.

Best regards,

Alexis.B

Hello, Could you explain how your system is an "innovative Co2 diffusion system" knowing that Biogent has been doing the same thing for years. Just because I'm looking for the most efficient way possible... Otherwise, I get it, made in Occitania, ...

Hello, thank you for your question.

The mosquito box system is as follows: thanks to a diffusion mixing CO2 and pheromones, the activity and perspiration of the human body is reproduced by the mosquito trap, in order to give them the impression of a human presence. Mosquitoes, fooled by the lure, are attracted to the trap before being sucked in.

The mosquito trap is environmentally friendly, and as you pointed out, 100% Made in France, mainly in the Occitanie region. The trap is connected to a dedicated application on your smartphone, and uses sensor technology to regulate its use according to the weather.

For further information, please contact us at 04.66.23.86.91

Best regards,

Alexis.B

Do you have cast-iron feet? About 50-60h Kind regards Claire

Hello, thank you for your question.

The G1900-3 base in cast iron is available in stock on our site.

If you would like a base with a height of 50 or 60 cm, we can offer you the BADEVEL base.

Thanks to its round cast-iron tube, it can be cut to any height.

The carefully crafted G1900-3 base offers a sturdy, elegant solution for your catering space. Its cast-iron construction guarantees exceptional strength and durability, perfect for intensive use. With its attractive design and high-quality finish, this base will add a touch of style to your restaurant.

The BADEVEL base offers the perfect combination of sturdiness and elegance. This cast-iron base offers a solid, durable solution for your indoor or outdoor dining space. Its high-quality construction guarantees optimum stability, even in the most demanding environments. Add a touch of style to your restaurant or terrace with our Badevel cast-iron base, designed to stand the test of time.

Yours sincerely

Alexis.B

Hello I'd like to order AIR DARK GREY 6588 chairs but when I look at the specifications under Unit per package it says 4. What does that mean exactly? Thank you in advance for your reply Mme Saliou

Hello, thank you for your question.

The "unit per package" field corresponds to the number of chairs in a box in our stock. You can order by unit when the product is in stock and therefore on our website.

Specially designed for outdoor spaces and CHR terraces, the AIR chair and its one-piece structure guarantee exceptional strength and durability. Enjoy hard-wearing outdoor furniture that's easy to maintain and suited to professional requirements. With its contemporary design and weather resistance, the Air chair is the perfect choice for CHR establishments looking for quality furniture for their outdoor spaces.

Yours sincerely

Alexis.B

Hello, do you make custom WOODART molded laminate table tops? I would like a tabletop that is 1m wide by 2m long. I look forward to hearing from you, Sincerely, Greg

Hello, thank you for your question.

The Woodart tray is a Werzalit-type industrial product. As a result, the dimensions are standardized and it is not possible to produce customized trays.

Please note that for standard sizes that we don't have in stock, the minimum order quantity is 50 pieces per size.

Our Woodart molded laminate trays are perfect for adding a modern, functional touch to your restaurant or brasserie. They can help create an attractive, long-lasting environment in your establishment. Woodart molded laminate trays are designed to withstand climatic variations, humidity and UV rays, making them ideal for outdoor use.

Thanks to their solid construction and special lamination, these trays are impact-, scratch- and stain-resistant, offering enhanced longevity.

Woodart molded laminate trays feature a modern, elegant design that blends harmoniously into contemporary outdoor spaces, adding a touch of sophistication to your establishment.

All in all, opting for a Woodart molded laminate tray for your contemporary CHR professional outdoor space is a wise choice. Thanks to their weather resistance, exceptional durability, contemporary design and easy maintenance, these trays perfectly meet the requirements of modern restaurants and brasseries.

Yours sincerely

Alexis.B

Does the mosquito trap come with the 1st bottle of CO2? Where can I buy these bottles?

Hello, thank you for your question.

The metal mosquito trap is delivered without CO2. You will have to find another point of sale to get it. We also have pheromones to feed the mosquito trap.

Our metal mosquito box with CO2 is specially designed for outdoor use, providing protection for a generous 750m².

Made in France, this environmentally-friendly solution lets you get rid of mosquitoes without using pesticides or insecticides that are harmful to the environment. Thanks to its innovative CO2 diffusion system, our mosquito box effectively attracts these pests, offering natural protection that respects the ecosystem.

Protect your outdoor space while preserving nature with our ecological mosquito box, made in France, available for professionals and private individuals from Richard Diffusion.

Yours faithfully

Alexis.B

Hello, is it necessary to order 24 polypro Paris armchairs from Siesta please. I am a private individual. Thank you for your answer

Hello, thank you for your question.

The "units per package" corresponds to the number of armchairs, in this case stackable, on a stack at our supplier's premises and therefore in our warehouses.

You can order individual chairs via the website.

The Paris armchair is an ideal choice for outdoor use. Made from durable polypropylene, it offers comfort and elegance for catering areas. Its modern design is perfectly suited to the needs of restaurants, cafés and hotels, as well as private individuals. Weather-resistant, the Paris armchair is perfect for outdoor use on terraces and gardens. Its stackability makes it easy to store, while its sturdy construction guarantees a long service life. Choose the Paris armchair to create a welcoming, modern ambience.

Yours sincerely

Alexis.B

Hello, will you receive more Air stools in grey please? I'd like to buy 4... Thank you for your answer

Hello, thank you for your question.

For the time being, this article will be restocked in dove and black.

Best regards,

Alexis.B

MARSAN tray with aluminum ring REF. 00340017CALD60. Can this tray be glued to an existing stand, and with what type of glue?

Hello, thank you for your question.

It is possible to glue the tray. You'll need to use silicone crystal glue.

Best regards,

Alexis.B

Is it possible to see your products in Nîmes or elsewhere. ( armchair Cabourg aluminium rattan braided nylon green) Thank you for your reply. H. Pelletier

Hello, thank you for your question.

We have a showroom on our premises in Nîmes. You can visit us at the following address: 390 Avenue Pavlov, Zone Industrielle de Saint-Césaire, 30900 Nîmes.

Best regards,

Alexis.B

Is it possible to have a 120×80 size! Thanks for your feedback

Hello, thank you for your question.

It is possible to answer your request but it is done on estimate.

Please send us the desired design, dimensions, quantity and your contact details (telephone number, e-mail address, postal address, first and last name and company name if you are a professional) by e-mail to the following address: contact@richard-diffusion.com

Best regards,

Alexis.B

Hello I need 150x90 is it possible? Thanks

Hello, thank you for your question.

Concerning the SOLO tray, the maximum dimension is 110x70. To place an out-of-stock order, a minimum order of 15 pieces is required.

Best regards,

Alexis.B

Hello, Custom made possible? I am looking for 2 86cm x 72cm trays

Hello, thank you for your question.

This tray is an imported product, so custom-made is not possible.

Best regards,

Alexis.B

Hello Would it be possible to have a green stone table top made to measure 1.10m x 1.10m?

Hello, thank you for your question

Concerning the MELUN PIERRE tray, it is possible to make it to measure, but this is done on quotation and with a 3-month lead time.

Best regards,

Alexis.B

Do they come in black?

Hello, thank you for your question

The Air 75 stool does come in black. Currently out of stock, a restocking is planned. We invite you to send us your request (quantity, color, delivery address, etc.) to our e-mail address, contact@richard-diffusion.fr, so that we can give you a precise quotation with delivery times for this order.

Yours faithfully

Alexis.B

Hello, I would like to have a quote on an order that is in my shopping cart? How can I do? I look forward to hearing from you

Hello, thank you for your question.

We are currently exhibiting at the Sirha trade show in Lyon. So, to make it quicker, we advise you to validate your basket on the site, select payment by transfer, and during the process, there will be a "comment" box. In this box, you'll need to indicate that you'd like a quote beforehand. This will enable us to access your order and generate a quote to send to you.

Best regards,

Alexis.B

Hello, I'm looking for a chair with either a black or light wood frame, with a seat upholstered in M1 fabric for contract use? various colors, gray, petrol blue, mustard yellow, powder pink... Thank you for your help, it's urgent, customer at the ...

Hello, thank you for your question

For a minimum quantity of 50 pieces, it is possible to make a chair with black or light wood legs, with M1 fabric covering, in a color of the customer's choice.

Please note that it takes 3 months to make and receive the products.

For your information, we will send you a precise quotation and suggest the products we have in stock to meet your requirements.

Sincerely

Alexis.B

FREQUENTLY ASKED QUESTIONS